's got the standard set as “Boot holster and Holdout blaster.” That'll get you in. But the Lancer Standard is as follows:


  1. Kenner toy blasters, modified Kenner toy blasters or resin recasts of Kenner toy blasters are not acceptable due to the fact they are approximately 10% larger in scale than an accurate blaster should be.
  2. Resin or hyperfirm rubber blasters are acceptable.
  3. Blasters with triggers are unacceptable as no screen props had them.

Some sites:

costuming/biker_scout_gun.txt · Last modified: 2014/04/25 09:06 by Jedi_Outcast77